No water treatment
Dry operation avoids cooling-water treatment, pumping and discharge requirements.
You May Also Like
BHX Combined-Flow Closed-Circuit Cooling Tower – Scalable, Efficient, and Low-Scaling Design
BNX Counterflow Closed Circuit Cooling Tower – High-Efficiency Industrial Heat Exchanger
ZNX Counterflow Evaporative Condenser – Compact, High-Performance Heat Rejection
ZHX Combined Flow Evaporative Condenser – Enhanced Efficiency with Fill-Assisted Heat Transfer
Cooling Coil
Drift Eliminator
PVC Fill
Fan
Spray Nozzle
V-Type Adiabatic Dry Cooler
Industrial Dry Cooler
Reliable heat rejection without cooling-water dependency
HACST Industrial Dry Coolers reject process heat to ambient air through finned coils and controlled airflow. They are designed for industrial process cooling, free-cooling applications and projects where water use is restricted or undesirable.
Water-free operation50 kW–2 MW rangeEC or AC fan optionsPLC / Modbus / BACnet
DESIGN & OPERATION
Sensible cooling with controlled airflow
Process fluid circulates through copper-tube, aluminum-fin coils while EC or AC fans move ambient air across the heat-transfer surface. PLC control can stage or modulate fans to follow the actual cooling demand.
- Modular coil layout: supports practical capacity matching and installation planning.
- Fan control options: EC or AC fans can be selected around duty, energy and noise requirements.
- Service access: fan and coil arrangements support routine cleaning and inspection.
KEY ADVANTAGES
A practical cooling solution for demanding operating conditions
Demand-based airflow
Fan staging and PLC control can match air volume to thermal load.
Free-cooling ready
Suitable for systems that use low ambient temperatures to reduce mechanical cooling demand.
Straightforward maintenance
Accessible fans and coils simplify regular cleaning, inspection and preventative care.
ENGINEERING OPTIONS
Configured to fit your process and site
Cooling duty, fluid temperatures, local design ambient, available footprint and automation requirements are reviewed before the unit configuration is confirmed.
Thermal duty
Capacity, flow rate and approach temperature define the coil and fan arrangement.
Controls
PLC with Modbus or BACnet can support building and process automation integration.
Noise strategy
Fan selection and operating logic can be reviewed against site noise limits.
Site conditions
Materials and protection can be considered for temperature range and environmental exposure.
TYPICAL APPLICATIONS
Where this system delivers the greatest value
HACST works with project teams to match cooling technology, operating conditions and installation constraints to the application.
Industrial process coolingData-center free coolingCommercial HVAC systemsWater-constrained projectsUtility and equipment loopsEnvironmental compliance upgrades
START WITH THE RIGHT DATA
Four inputs for selecting an Industrial Dry Cooler
- Define heat rejection dutyProvide capacity, flow rate, fluid type and entering/leaving temperatures.
- Confirm design ambientShare the installation location and the highest expected outdoor design condition.
- Review layout and noiseIdentify footprint, airflow clearance, maintenance access and applicable noise limits.
- Align controlsSpecify preferred fan control, BMS/DCS interfaces and operating strategy.
ENGINEERING SUPPORT
Need help selecting a cooling system?
Share your process data, design ambient conditions and site constraints. Our engineering team will help define a practical configuration.
Ready to Optimize Your Cooling System?
Explore HACST's high-performance cooling solutions. Whether you need cooling towers, evaporative condensers, or air coolers, our solutions are built to meet your industrial and HVAC needs. Get in touch with our experts for a custom quote!